If you are having a hard time with the Netgear router red light issue, then know that you are not alone. Users all across the world have reported that they are tired of seeing the blinking red LED light on their Netgear routers. So, worry not. We’ve helped many and will help you too. Walkthrough the Netgear router troubleshooting tips mentioned in this article and learn how to fix the red light issue in a flash!
Resolved: Netgear Router Red Light Issue
- Check the Power Supply
Before you do anything else, check whether your Netgear wireless router is getting an adequate power supply from the wall socket or not. Check whether the wall socket your router is connected to is not damaged. In case what we are assuming is true, then you have two options:
- Get your current wall outlet fixed.
- Plug your Netgear WiFi router into another wall socket.
Now, check whether you are able to get rid of the Netgear router red light issue.
- Verify the Cable Connections
If you are still seeing a blinking red LED on your Netgear router, that’s probably because of a weak connection between your WiFi devices. Therefore, check whether the cable connecting your Netgear router and modem is not worn out from anywhere.
If it is, it is recommended that you get it replaced with a new one right away. In case doing so doesn’t work in your favor, consider connecting your devices wirelessly.
- Update the Firmware
Performing Netgear router firmware update can also help you get rid of the red light issue. So, what are you waiting for? Update the firmware of your device immediately by following the instructions mentioned below:
- Turn on your PC and launch an internet browser on it.
- In the address bar of the internet browser, type routerlogin.net, and press Enter.
- You will be taken to the Netgear router login page.
- Enter the default login credentials into the given fields, and click Log In.
- Once the Netgear Genie smart setup wizard appears, go to Settings.
- Click Firmware Update under the Administration option.
Once you are done updating the firmware of your device to the latest version, check whether you are able to troubleshoot the Netgear router red light issue. Still no luck?
- Keep WiFi Interference at Bay
Sadly, if you are still struggling with the Netgear router red light issue, that’s probably because of WiFi interference. Thus, to resolve the issue, you already know what to do – keep WiFi interference at bay.
In simple words, keep your router away from devices and appliances like cordless phones, baby monitors, washing machines, treadmills, televisions, Bluetooth speakers, refrigerators, microwave ovens, etc.
- Perform Factory Default Reset
Did nothing mentioned above help you resolve the Netgear router red light issue? If you are nodding your head in yes, then, unfortunately, you are left with no other option than to reset your wireless device.
Here are the steps you need to follow to perform Netgear factory default reset:
- Switch on your PC and head over to Google Chrome.
- In the address bar located at the top left corner, type routerlogin.net, and press Enter.
- You will get directed to the routerlogin.net login page.
- Log in to your router using the default admin details.
- Head over to the Settings menu and look for the Reset option.
- Click it and confirm your decision by hitting Yes.
Once you are done resetting your device, check whether the Netgear router red light issue has been banished or not.
Bottom Line
This was all about the troubleshooting tips to help you fix the Netgear router red light issue. We hope that these tips helped you get rid of the issue you were facing with your wireless device.